Recent content by crxman2010

Random Stuff

Random Stuff

I have my full hood covered with a clear bra and I was wondering what kind of problems that will cause for hail dent repair. Is the clear bra in the affected areas going to need to be removed? Just looking for a second opinion before I speak with my claims monkey. Thanks

So what do you have against these foreign manufactures such as Toyota or Honda that are building factories in the United States? I mean to my dismay, if I order an Acura TL from the factory, it comes from Marysville, Ohio. Fusions I believe are still built in Mexico. Escape may still be...

There are LC 4" HydroTechs that I currently use and I have heard that 4" LC Flats exists just never seen them. If it doesn't need to be foam, Optimum has 4.25" MF pad available that should work nicely with that backing plate.

Not that I requested but I am hoping to see my 1/2 gallon waterless wash show up in paper. UPS has done an extremely awesome job of damaging packages with heavy products (1/2 gallons or gallon containers) but I am thinking the paper might do better than the peanuts with the weight.

And if you have ever had an issue with clean glass causing your microfibers to lint, once the windows are coated with opti-seal the problem goes away ;). Still can be an issue on the inside.

When I had brought the topic up before of topping collinite 845 over poli-seal, a 12-24 cure time was highly recommended for the protection portion of poli-seal to cure. However, due to winters short days and cold weather, I did put 845 on poli-seal within 1-2 hours of doing the poli-seal and...

It is possible having something under the opti-seal could cause fogginess, I believe opti-seal will try to work itself to the bottom when applied over another product which never sounded good to me in terms of clarity and have never tried it. So I would probably say if your going GPS first, use...

Applicator - MF pad, currently I think its a Meguiars Even Coat applicator. I switched to this from a yellow foam applicator because of static, a good clean window, some opti-seal, and a foam pad seemed to result in good amount of static. I also think the mf pad does a better job of spreading...

I just get so excited when my order gets here that the peanuts go everywhere. :buffing: And it can be rather sad to watch my dogs chase them like two cat nipped fur bags.

I have never had to warm it up. I have never tried applying it below say 55-60 degrees and a good shaking of the bottle has always turned it to liquid.

I have found it to always be visible when applying it to glass and you will notice the product flashing off with that oil slick look. But if your applying the "correct" amount, the time between application and flashing to clear can be quick depending on the weather. Far as removing it, if you...

The oily smear you are likely seeing is from using to much product. When I use products that are WOWA (Wipe On Walk Away), I always follow the application up with a microfiber and a light touch to avoid later surprises. (opti-seal, opti-coat) Next time you apply opti-seal to windows, paint...

And anywhere they don't go automatically, my dogs make sure they get there.